torna all'home page

LINEAR STRIP BRUSHES
   
  Back to the index  
 
The U-section metallic base allows to produce high density brushes, to be mounted as seal onto machines or industrial doors.

REQUEST OF OFFER

To request us an offer of linear strip brushes please complete Table 2.4 .
 
In Figure 2.5 a single band strip brush is represented. The same dimensions are valid for the double band strip brushes, whose specific characteristics are indicated in Figure 2.3.
 
       
Two models of channel are available for the mounting of the single band linear strip brush (Figure 2.6).
The model (a) must be welded to the metallic backing, the model (b) must be fixed by screws (Figure 2.7).
Available sizes are indicated in Table 2.5. The standard lenght is 1000 mm except for B=5 model (b) that is 2500 mm.
       
 
   

TAB 2.5 (a)

B
8
10
13
14
20
BS

13
14
19
19
24
TS
12
12
15
15
27
MATERIAL
Galvanized Iron

 

TAB 2.5 (b)

B
5
8
10
13
14
BS
8,1
13
14
19
19
TS
8,8
12
12
17
17
HS
24,8
30
30
38
38
MATERIAL
Black or Natural Anodized Aluminum
Galvanized Iron
 
 
TAB 2.4

PIECES N°

SINGLE BAND DOUBLE BAND
BASE IN GALVANIZED IRON BASE IN STAINLESS STELL
B = mm H = mm L = mm
BRISTLE MATERIAL
DIAMETER OF THE BRISTLE d = mm
straight crimped white black

CHANNEL MODEL (a) FIG.2.6

CHANNEL MODEL (b) FIG.2.6

 

NAME
COMPANY
TEL.
FAX
E-MAIL
FURTHER INFORMATION
 
 
                 
     
  Back to the index