torna all'home page

ROLLER PUNCHED BRUSHES
   
 
The working surface of a ROLLER PUNCHED BRUSHED may be cylindrical, shaped or helicoidal (to move the material). They can be of modular type and may be designed depending on the characteristic of their drive.

REQUEST OF OFFER

To request us an offer of roller punched brushes please complete Table 1.5.
Simbols refer to Figure 1.2, 1.3 and 1.5.

 
 
 
 
TABLE 1.5

PIECES N°

D1 = mm D2 = mm D3 = mm L = mm
A = mm minimum value B = mm minimum value

PL = mm

longitudinal pitch

PT = mm

transversal pitch

D = mm

tuft diameter
GRID: Stagger Parallel Spiral α = degrees
BACKING MATERIAL
FILAMENT MATERIAL
DIAMETER OF THE FILAMENT d = mm

Straight Crimped

White Black
POSSIBLE INCLINATION OF THE TUFTS:
Longitudinal
Transversal
DEGREES =
 
NAME
COMPANY
TEL.
FAX
E-MAIL
FURTHER INFORMATION